Industrial Hot Sellling Smart Series One-Color Radiation Temperature Meter for New Material

• Output Signal Type: Digital Type
• Material: Metal
• IP Rating: IP54
• Certification: ISO
• Customized: Customized
• Warranty: 1 Year
• Model NO.: SMART-FS-8030
• Temperature Range: 800ºC-3000ºC
• Wavelength: (0.85~1.1)μm
• Accuracy: ±0.5%
• Repeat Accuracy: ±2ºC
• Response Time: Fastest 5ms, 5ms-99.99s Adjustable
• Resolution: 0.1ºC
• Display: Industrial-Grade Self-Luminous OLED Display Screen
• Usage: Industrial
• Application: Steelmetallurgy/Heattreatment/Furnace/Photovoltaic
• Output: Multiple Analog/Alarms/PNP/RS485 Output
• After-Sales Service: 24 Hours Customer Service
• Transport Package: Carton/ Wooden Case
• Trademark: SIJIE INFRARED
• Origin: China
• HS Code: 90251910
• Production Capacity: 500 Sets/Month

Product Description

Sighting System

Product Description

SMART-F series one color infrared pyrometer is a series of high performance and intelligent one-color infrared pyrometer. It consists of lens, fiber optics and processing components. Fiber optic can bear high temperature up to 250 ºC and do not need additional cooling. It has strong casing, use stainless steel lens(with air purge functions), die cast aluminum housing, protection grade is IP54.

It use the manual adjustable focal lens, achromatic lens combination, high reliability circuit design (low temperature drift, fully digital measurement design, high integration SOC chip application, visualization OLED operation interface) and software design (ambient temperature compensation, real-time signal processing, abnormal signal processing, software code optimization in all kinds of application environment).These special designs enable SMART-F series one-color pyrometer to meet the use in a variety of harsh industrial sites and precise temperature control requirements.

SMART-F series one-color pyrometer determine the temperature of an object by receiving the sum of the narrow-band radiation energy emitted by the object. It adopts advanced hardware and software design, has a super wide dynamic range, and has high stability.

It can be widely used in metallurgical industry (wire rod, hot rolled plate,forging) and forging industry, heat treatment, induction heating, monocrystalline silicon and polycrystalline silicon,etc. SMART-F series is not only suitable for general industrial occasions of temperature measurement, but also suitable for installation in occasions with strong electromagnetic interference and high environmental temperature.

Product Parameters

SMART Series One-Color Technical Parameter

Model	SMART-FS-6016	SMART-FS-7022	SMART-FS-7030	SMART-FS-3014	SMART-FS-3522	SMART-FS-4030
Measuring Range(ºC)	600~1600	700~2200	700~3000	300~1400	350~2200	400~3000
Detector	Si(silicon photoelectric cell)			InGaAs
Wavelength	(0.85~1.1)μm			(1.45~1.7)μm
Main Application	Continuous casting, hot rolling, induction heating, polysilicon, monocrystal silicon, measurement in high temperature environment.			Induction heating, heat treatment, polysilicon and monocrystal silicon, measurement in high temperature environment.
Distance Coefficient	150:1	200:1		150:1	200:1
Measuring Distance	adjustable from 0.15m to infinite
Measuring Accuracy	±0.5%tmºC(tm is upper limit of measuring range)
Resolution	0.1ºC
Repeat Accuracy	±2ºC
1-color Coefficient	0.100~1.100,adjustable in 0.001 increment
Response Time	Fastest 5ms,adjustable
Signal processing	Peak value, valley value, average temperature value; Ambient temperature too high/low alarm;Power down protection etc.
Output	Group1: Multiple analog outputs 16bit(4mA~20mA,0mA~20mA,0V~5V, 0V~10V switchable ), output resolution 16bit,accurate to 0.1ºC,maximum current loop output load 600Ω, maximum current output load 10mA
	Group2: Analog outputs 4mA~20mA, resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω
	Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms
	PNP level output(current output 100mA,with overload protection.)
	RS485 output,with functions of parameters modification, data logging and inquiry
Display Mode	Industrial-grade self-luminous OLED display screen
Power Supply	DC(20~30)V,power consumption: 5W(24V@200mA), with over voltage, over current and short circuit protection; with built-in EMI wave filter, resistance to pulse group's Interference of 2500VDC
Warm up time	With built-in 40ºC constant temperature heater, assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature.
Aiming Method	Built-in red laser aiming
Operating environment	No water cooling:-20ºC~+60ºC, With water cooling:-20ºC~+200ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min Lens and fiber:-20ºC~+250ºC(air purge pressure: 0.1MPa,flow rate: 6L/ min)
IP rate	IP54

Product Features

• Temperature measuring range covers 300ºC ~3000ºC
• Temperature measurement accuracy up to 0.5%
• Repeat accuracy 2ºC ,Resolution 0. 1 ºC
• Response time 5ms~99.99s adjustable
• Use manually adjustable focus lens
• Using laser aiming, clearly show position and size of target
• PID constant temperature control is adopted for the detector,with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
• Narrow-band infrared color filter specially designed to minimizes the influence of emissivity on detector
• Use industrial grade OLED screen as display interface, friendly man-machine interface
• Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
• Use watchdog such as hardware EMI filter to improve the stability of the system, which can resist 2500VDC pulse group interference
• Support bus cascade connection of up to 26 pyrometers, and realize network control through PC

Application Area

Company Profile

Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities. 
Our company's main products are STRONG series two color pyrometer and one color pyrometer, SMART series optical fiber two color pyrometer and one color pyrometer, MARS series one color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries. Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.

Packaging & Shipping

Package size per unit product	36*26*18cm
Gross weight per unit product	5kg(with cooling jacket and air purge)

 

Exhibiting

Certifications