Basic Info.
Output Signal Type
Digital Type
Temperature Range
600ºC-1600ºC
Wavelength
Wavelength1:(0.7~1.08)μm;Wavelength2:1.08μm
Response Time
Fastest 5ms, 5ms-99.99s Adjustable
Display
Industrial-Grade Self-Luminous OLED Display Screen
Application
Steelmetallurgy/Heattreatment/Furnace/Photovoltaic
Output
Multiple Analog/Alarms/PNP/RS485 Output
After-Sales Service
24 Hours Customer Service
Transport Package
Carton/ Wooden Case
Product Description
Sighting System
Product Description
SMART Series Fiber Optic Two Color Infrared PyrometerSMART-F series two color infrared pyrometer is a series of high performance and intelligent two-color infrared pyrometer. It consists of lens, fiber optics and processing components. Fiber optic can bear high temperature up to 250°C and do not need additional cooling. It has strong casing, use stainless steel lens(with air purge functions), die cast aluminum housing, protection grade is IP54.
It use the manual adjustable focal lens, achromatic lens combination, high reliability circuit design (low temperature drift, fully digital measurement design, high integration SOC chip application, visualization OLED operation interface) and software design(ambient temperature compensation, real-time signal processing, abnormal signal processing, software code optimization in all kinds of application environment).These special designs enable SMART-F series one-color pyrometer to meet the use in a variety of harsh industrial sites and precise temperature control requirements. SMART-F series two-color pyrometer determines the temperature of an object by measuring the ratio of energy at two different wavelengths. The advanced software and hardware design help pyrometers meet the application in harsh environment as moisture, dust, target size change, partial blockage and emissivity change, even if the detection signal attenuates 95%, the temperature measurement results will not be effected.
SMART-F series two-color infrared pyrometer can meet the requirements of two color measuring in various industrial occasions. For example, medium-high temperature below 2000°C, such as: hot rolled plate, casting, cement kiln, heat treatment, induction heating, monocrystalline silicon and polycrystalline silicon, etc. It can also be used in ultra-high temperature below 3000°C measuring with high stability, such as vacuum furnace, graphite furnace, high-temperature furnace etc. SMART-F series is not only suitable for general industrial occasions of temperature measurement, but also suitable for installation in occasions with strong electromagnetic interference and high environmental temperature.
Product Parameters
SMART Series Two-Color Technical Parameter
| Model | SMART-FGR-4014 | SMART-FGR-4522 | SMART-FSR-6016 | SMART-FSR-7025 | SMART-FSR-8030 |
| Measuring Range(ºC) | 400~1400 | 450~2200 | 600~1600 | 700~2500 | 800~3000 |
| Detector | InGaAs/InGaAs | Si/Si(Laminated Silicon) |
| Wavelength | Wavelength 1:(0.9~1.7)μm, Wavelength 2:1.7μm | Wavelength 1:(0.7~1.08)μm, Wavelength 2:1.08μm |
| Main Application | Continue casting, hot rolling, induction heating, polysilicon, monocrystal silicon, measurement in high temperature environment. |
| Distance Coefficient | 50:1 | 100:1 | 50:1 | 100:1 | 200:1 |
| Measuring Distance | adjustable from 0.15m to infinite |
| Measuring Accuracy | ±0.5%tmºC(tm is upper limit of measuring range) |
| Resolution | 0.1ºC |
| Repeat Accuracy | ±2ºC |
| 1-color Coefficient | 0.100~1.100,adjustable in 0.001 increment |
| 2-color Coefficient | 0.850~1.150,adjustable in 0.001 increment |
| Response Time | Fastest 5ms,5ms~99.99ms adjustable |
| Signal processing | Peak value, valley value, average temperature value; Ambient temperature too high/low alarm;Power down protection etc. |
| Output | Group1: Multiple analog outputs 16bit(4mA~20mA,0mA~20mA,0V~5V,0V~ 10V switchable ), output resolution 16bit,accurate to 0.1°C,maximum current loop output load 600Ω,maximum current output load 10mA |
Group2: Analog outputs 4mA~20mA, resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω |
Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms |
PNP level output(current output 100mA,with overload protection.) |
RS485 output,with functions of parameters modification, data logging and inquiry |
| Display Mode | Industrial-grade self-luminous OLED display screen |
| Power Input | DC(20~30)V,power consumption: 5W(24V@200mA), with over voltage, over current and short circuit protection; with built-in EMI wave filter, resistance to pulse group's Interference of 2500VDC |
Warm up time | With built-in constant temperature heater,start temperature measurement within 10mins after power on |
Aiming Method | Built-in red laser aiming |
| Operating environment | No water cooling:-20ºC~+60ºC, With water cooling:-20ºC~+200ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min Lens and fiber:-20ºC~+250ºC(air purge pressure: 0.1MPa,flow rate: 6L/ min) |
| IP rate | IP54 |
Product Features
• Temperature measuring range covers 400ºC ~3000ºC
• Temperature measurement accuracy up to 0.5%,repeat accuracy 2ºC ,Resolution 0. 1 ºC
• Response time 5ms~99.99s adjustable
• Use manually adjustable focus lens,focal length is from 0.15m to infinity
• Using laser aiming, clearly show position and size of target
• PID constant temperature control is adopted for the detector,with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
• This series has both two-color and one-color measurement function
• Use industrial grade OLED screen as display interface, friendly man-machine interface
• Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
• Anti- jamming design of software and hardware improves system stability, and canresist 2500VDC burst interference
• Support bus cascade connection of up to 26 pyrometers, and realize network control through PC
Application Area
Company Profile
Changzhou Sijie Optoelectronics Technology Co.,Ltd.
Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities.
Our company's main products are STRONG series two color pyrometer and one color pyrometer, SMART series optical fiber two color pyrometer and one color pyrometer, MARS series one color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries. Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.
Packaging & Shipping
| Package size per unit product | 36*26*18cm |
| Gross weight per unit product | 5kg(with cooling jacket and air purge) |
Exhibiting
Certifications
Address:
Room 101, Building 2, No. 101, Lianfeng Road, Dingyan Subdistrict, Economic Zone, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, BSCI
Company Introduction:
Sijie optoelectronics has nearly 20 years of experience in infrared product R & D, master the core technology of infrared temperature measurement, and has independent intellectual property rights. The company has strong technical force, mature production technology, advanced experimental equipment and complete production facilities. It implements strict total quality management from the aspects of product design, part selection, supplier selection, product assembly, finished product inspection and after-sales service, so as to escort the product quality in an all-round way.
The company′s leading products include strong series two-color thermometer, monochrome thermometer, smart series optical fiber two-color thermometer, monochrome thermometer and Mars series monochrome thermometer. The products are at the leading level at home and abroad. They are widely used in metallurgy, heat treatment, chemical industry, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries, and have been highly praised by our customers.
Adhering to the business philosophy of "improving quality through innovation and creating value for customers", Sijie optoelectronics focuses on the field of infrared photoelectric measurement and will wholeheartedly provide customers with high-quality products and professional services.
){kind=link}