Basic Info.
Function Type
Infrared Pyrometer
Output Signal Type
Digital Type
Temperature Range
350ºC-1400ºC
Wavelength
Wavelength1:(0.9~1.7)μm;Wavelength2:1.7μm
Response Time
Fastest 5ms, 5ms-99.99s Adjustable
Display
Industrial-Grade Self-Luminous OLED Display Screen
Application
Steelmetallurgy/Heattreatment/Furnace/Photovoltaic
Output
Multiple Analog/Alarms/PNP Level/RS485 Output
After-Sales Service
24 Hours Customer Service
Transport Package
Carton/ Wooden Case
Product Description
Sighting System
Product Description
STRONG Series TWO Color Infrared Pyrometer
STRONG Series two color infrared pyrometer(also known as ratio infrared pyrometer), is a series of high performance and intelligent twocolor infrared pyrometer.It has solid firm,304 stainless steel intermachine, 304 stainless steel protection jacket with optional air purge and water cooling functions. It uses the manual adjustable focal length, achromatic lens, high reliability circuit design (low temperature drift, full digital measurement design, high integration SOC chip application, visualize OLED operation interface)and software design(ambient temperature compensation, realtime signal processing, abnormal signal processing, software code optimization in all kinds of application environment ).These special designs enable the STRONG series of twocolor pyrometers to meet the use in a variety of harsh industrial field and precise temperature control requirements.STRONG series twocolor pyrometer determines the temperature of an object by measuring the ratio of energy at two different wavelengths. The advanced software and hardware design help pyrometers meet the application in harsh environment as moisture,dust, target size change, partial blockage and emissivity change, even if the detection signal attenuates 95%, the temperature measurement results will not be effected.
This series is not only suitable for temperature measurement in general industrial occasions, but also suitable for precise measuring of small targets at long distance,materials with easy changing emissivity, and in occasions with strong attenuation.
STRONG series twocolor infrared pyrometer can meet the requirements of twocolor measuring in various industrial occasions. For example, mediumhigh temperature below 2000ºC, such as: wire rod, hot rolled plate, forging, casting, cement kiln, heat treatment, induction heating, monocrystalline silicon and polycrystalline silicon, etc. It can also be used in ultra-high temperature below 3000ºC measuring, such as vacuum furnace, graphite furnace, high-temperature furnace etc. Measurement has high stability.
Product Parameters
STRONG-GR Series Two Color Pyrometers Technical Parameter
| Model | STRONG-GR-2512 | STRONG-GR-3514 | STRONG-GR-4020 | STRONG-GR-4525 |
| Measuring Range | 250ºC~1200ºC | 350ºC~1400ºC | 400ºC~2000ºC | 450ºC~2500ºC |
| Detector | InGaAs/InGaAs(Laminated InGaAs) |
| 1-color Wavelength | 1.7μm |
| 2-color Wavelength | Wavelength1:(0.9~1.7)μm;
Wavelength2:1.7μm | Wavelength1(1.25~1.7)μm;
Wavelength2:1.7μm |
| Main Applications | Hot rolled steel, wire rod, Non-ferrous metal processing, induction heating, galvanized wire | Laser heating or vacuum furnace |
| Distance Coefficient | 30:1 | 60:1 | 100:1 | 200:1 |
| Measuring Distance | Standard focal length:adjustable from 0.35m to infinite;near focal length:0.2m~0.5m |
| Measuring Accuracy | ±0.5%T(T is measured value) |
| Resolution | 0.1ºC |
| Repeat Accuracy | ±2ºC |
| 1-color Coefficient | 0.100~1.100,adjustable in 0.001 increment |
| 2-color Coefficient | 0.850~1.150,adjustable in 0.001 increment |
| Response Time | Fastest 5ms,5ms-99.99s adjustable |
| Signal processing | Peak value, valley value, average temperature value; Ambient temperature too high/low alarm; switch between one-color and two-color mode; power down protection. |
| Output | Group1: Multiple analog outputs 16bit(4mA~20mA, 0mA~20mA, 0V~5V, 0V~10V optional), output resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω,maximum current output load 10mA |
Group2: Analog outputs 4mA ~ 20mA, resolution 16bit, accurate to 0.1ºC, maximum
current loop output load 600Ω |
| Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms |
| PNP level output(current output 100mA,with overload protection.) |
| RS485 output,with functions of parameters modification, data logging and inquiry |
| Display Mode | Industrial-grade self-luminous OLED display screen |
| Power Input | DC(20~30)V,with over voltage, over current and short circuit protection; Power consumption:5W(24V@200mA)with built-in EMI wave filter, resistance to pulse group's Interference:2500VDC |
| Warm up time | With built-in 40ºC constant temperature heater, start temperature measurement within
10mins after power on. Assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature. |
| Aiming Method | Green visible aiming laser or eyepiece, choose 1 |
| Port | Imported sealed plug and 12-core high-temperature shielded cable |
| Operating Environment | No water cooling:-30ºC~+65ºC,air purge pressure: 0.1MPa,flow rate: 6L/ min
With water cooling:-30ºC~+120ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min |
| Protection Level | IP65 |
Product Features
• Temperature measuring range covers 250ºC~3000ºC
• Temperature measuring accuracy is 0.5%, repeat accuracy is 2ºC,resolution is 0.1ºC
• Response time is adjustable from 5ms~99.99s
• Use manually adjustable focus lens, a standard focal length is from 0.35m to infinity, a near focal length is adjustable from 0.2m to 0.5m
• PID constant temperature control is adopted for the detector, with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
• This series has both two-color and one-color measurement function
• Use high brightness green LED light source or eyepiece aiming, clearly display the location and size of test target
• In two color mode, pyrometer has lens dirty detection function
• Use industrial grade OLED screen as display interface, friendly man-machine interface
• Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
• Anti- jamming design of software and hardware improves system stability, and can resist 2500VDC burst interference
• Anti-oxidation measurement function, with this function, measurement will not be affected by oxide
• Support bus cascade connection of up to 26 pyrometers, and realize network control through PC
Application Area
Company Profile
Changzhou Sijie Optoelectronics Technology Co.,Ltd.
Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities.
Our company's main products are STRONG series two color pyrometer and one color pyrometer, SMART series optical fiber two color pyrometer and one color pyrometer, MARS series one color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries. Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.
Packaging & Shipping
| Package size per unit product | 36*26*18cm |
| Gross weight per unit product | 5kg(with cooling jacket and air purge) |
Exhibiting
Certifications
Address:
Room 101, Building 2, No. 101, Lianfeng Road, Dingyan Subdistrict, Economic Zone, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, BSCI
Company Introduction:
Sijie optoelectronics has nearly 20 years of experience in infrared product R & D, master the core technology of infrared temperature measurement, and has independent intellectual property rights. The company has strong technical force, mature production technology, advanced experimental equipment and complete production facilities. It implements strict total quality management from the aspects of product design, part selection, supplier selection, product assembly, finished product inspection and after-sales service, so as to escort the product quality in an all-round way.
The company′s leading products include strong series two-color thermometer, monochrome thermometer, smart series optical fiber two-color thermometer, monochrome thermometer and Mars series monochrome thermometer. The products are at the leading level at home and abroad. They are widely used in metallurgy, heat treatment, chemical industry, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries, and have been highly praised by our customers.
Adhering to the business philosophy of "improving quality through innovation and creating value for customers", Sijie optoelectronics focuses on the field of infrared photoelectric measurement and will wholeheartedly provide customers with high-quality products and professional services.
){kind=link}