Long Service Life Smart Series Two-Color Infrared Pyrometer for Glass

• Output Signal Type: Digital Type
• Material: Metal
• IP Rating: IP54
• Certification: ISO
• Customized: Customized
• Warranty: 2 Years
• Model NO.: SMART-FSR-7018
• Temperature Range: 700ºC-1800ºC
• Wavelength: Wavelength1:(0.7~1.08)μm;Wavelength2:1.08μm
• Accuracy: ±0.5%
• Repeat Accuracy: ±2ºC
• Response Time: Fastest 5ms, 5ms-99.99s Adjustable
• Resolution: 0.1ºC
• Display: Industrial-Grade Self-Luminous OLED Display Screen
• Usage: Industrial
• Application: Steelmetallurgy/Heattreatment/Furnace/Photovoltaic
• Output: Multiple Analog/Alarms/PNP/RS485 Output
• After-Sales Service: 24 Hours Customer Service
• Transport Package: Carton/ Wooden Case
• Trademark: SIJIE INFRARED
• Origin: China
• HS Code: 90251910
• Production Capacity: 500 Sets/Month

Product Description

Sighting System

Product Description

SMART-F series two color infrared pyrometer is a series of high performance and intelligent two-color infrared pyrometer. It consists of lens, fiber optics and processing components. Fiber optic can bear high temperature up to 250°C and do not need additional cooling. It has strong casing, use stainless steel lens(with air purge functions), die cast aluminum housing, protection grade is IP54.

It use the manual adjustable focal lens, achromatic lens combination, high reliability circuit design (low temperature drift, fully digital measurement design, high integration SOC chip application, visualization OLED operation interface) and software design(ambient temperature compensation, real-time signal processing, abnormal signal processing, software code optimization in all kinds of application environment).These special designs enable SMART-F series one-color pyrometer to meet the use in a variety of harsh industrial sites and precise temperature control requirements. SMART-F series two-color pyrometer determines the temperature of an object by measuring the ratio of energy at two different wavelengths. The advanced software and hardware design help pyrometers meet the application in harsh environment as moisture, dust, target size change, partial blockage and emissivity change, even if the detection signal attenuates 95%, the temperature measurement results will not be effected.

SMART-F series two-color infrared pyrometer can meet the requirements of two color measuring in various industrial occasions. For example, medium-high temperature below 2000°C, such as: hot rolled plate, casting, cement kiln, heat treatment, induction heating, monocrystalline silicon and polycrystalline silicon, etc. It can also be used in ultra-high temperature below 3000°C measuring with high stability, such as vacuum furnace, graphite furnace, high-temperature furnace etc. SMART-F series is not only suitable for general industrial occasions of temperature measurement, but also suitable for installation in occasions with strong electromagnetic interference and high environmental temperature.

Product Parameters

SMART Series Two-Color Technical Parameter

Model	SMART-FGR-4014	SMART-FGR-4522	SMART-FSR-6016	SMART-FSR-7025	SMART-FSR-8030
Measuring Range(ºC)	400~1400	450~2200	600~1600	700~2500	800~3000
Detector	InGaAs/InGaAs		Si/Si(Laminated Silicon)
Wavelength	Wavelength 1:(0.9~1.7)μm, Wavelength 2:1.7μm		Wavelength 1:(0.7~1.08)μm, Wavelength 2:1.08μm
Main Application	Continue casting, hot rolling, induction heating, polysilicon, monocrystal silicon, measurement in high temperature environment.
Distance Coefficient	50:1	100:1	50:1	100:1	200:1
Measuring Distance	adjustable from 0.15m to infinite
Measuring Accuracy	±0.5%tmºC(tm is upper limit of measuring range)
Resolution	0.1ºC
Repeat Accuracy	±2ºC
1-color Coefficient	0.100~1.100,adjustable in 0.001 increment
2-color Coefficient	0.850~1.150,adjustable in 0.001 increment
Response Time	Fastest 5ms,5ms~99.99ms adjustable
Signal processing	Peak value, valley value, average temperature value; Ambient temperature too high/low alarm;Power down protection etc.
Output	Group1: Multiple analog outputs 16bit(4mA~20mA,0mA~20mA,0V~5V,0V~ 10V switchable ), output resolution 16bit,accurate to 0.1°C,maximum current loop output load 600Ω,maximum current output load 10mA
	Group2: Analog outputs 4mA~20mA, resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω
	Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms
	PNP level output(current output 100mA,with overload protection.)
	RS485 output,with functions of parameters modification, data logging and inquiry
Display Mode	Industrial-grade self-luminous OLED display screen
Power Input	DC(20~30)V,power consumption: 5W(24V@200mA), with over voltage, over current and short circuit protection; with built-in EMI wave filter, resistance to pulse group's Interference of 2500VDC
Warm up time	With built-in constant temperature heater,start temperature measurement within 10mins after power on
Aiming Method	Built-in red laser aiming
Operating environment	No water cooling:-20ºC~+60ºC, With water cooling:-20ºC~+200ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min Lens and fiber:-20ºC~+250ºC(air purge pressure: 0.1MPa,flow rate: 6L/ min)
IP rate	IP54

Product Features

• Temperature measuring range covers 400ºC ~3000ºC
• Temperature measurement accuracy up to 0.5%,repeat accuracy 2ºC ,Resolution 0. 1 ºC
• Response time 5ms~99.99s adjustable
• Use manually adjustable focus lens,focal length is from 0.15m to infinity
• Using laser aiming, clearly show position and size of target
• PID constant temperature control is adopted for the detector,with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
• This series has both two-color and one-color measurement function
• Use industrial grade OLED screen as display interface, friendly man-machine interface
• Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
• Anti- jamming design of software and hardware improves system stability, and canresist 2500VDC burst interference
• Support bus cascade connection of up to 26 pyrometers, and realize network control through PC

Application Area

Company Profile

Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities. 
Our company's main products are STRONG series two color pyrometer and one color pyrometer, SMART series optical fiber two color pyrometer and one color pyrometer, MARS series one color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries. Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.

Packaging & Shipping

Package size per unit product	36*26*18cm
Gross weight per unit product	5kg(with cooling jacket and air purge)

 

Exhibiting

Certifications